Home › Cardistry › Faro shuffle
How to do the faro shuffle
The short version
Cut the deck into two halves of exactly 26 cards, square each half until its edges are flush, and push the short ends gently together so the cards slide in between each other, one from each half in turn. If nothing weaves, the problem is usually not your hands: the halves are not square, you are pressing too hard, or the deck wants to go the other way up. Turn both halves over and try again.
What the faro shuffle looks like
A faro shuffle weaves the two halves of the deck together so perfectly that the cards alternate exactly: one from the left half, one from the right, all the way through. Wikipedia says it is also called the weave shuffle in Britain and the dovetail shuffle, and that mathematicians use the name for exactly this: two piles of 26, perfectly interleaved.
It is not the same as the riffle shuffle. A riffle lets the cards drop off your thumbs and aims to alternate them, but does not promise it. A faro is pushed together, slowly, and when it works nothing is left to chance. That is why card magicians love it: a perfect faro does not mix the deck at random, so the order of the cards after it can be worked out (see in-shuffles and out-shuffles below). Wikipedia calls a perfect faro one of the most difficult sleights, because it needs an exact cut and just the right pressure. Everyone who learns it gets stuck at first.
Before you start
- The deck matters more than for any other move. When cards are made, the cutting leaves each edge with a slight slope, called a bevel, and the bevel lets one card slip past the next. The Playing Card Decks blog says a new deck works best and that a very worn or cheap deck is hard to faro smoothly. In one Reddit thread, people suggested Bicycle and Bee decks for practice and warned that thick plastic cards and cheap corner-store decks may not faro at all. See where to buy decks.
- Which way up. Because of that bevel, most decks weave more easily one way up than the other. Sources disagree about which way suits which deck (see where guides differ), so test it: if the halves will not weave face down, turn both halves face up and try again. Once a deck is broken in, the blog says, it gets easier both ways.
- Use a deck you do not mind wearing out. Several people in that thread said learning the faro roughs up the edges, and one said they ruined two decks by pressing too hard.
- Left-handed? Everything here is written for a right-handed person. Mirror it.
- Where to practice. At a table, so you can square the halves on it.
The steps
Read the steps, then look at the three pictures. The first two are from above. The third is from the side of the deck, where the two halves are tinted differently so you can see them weave. The letters mark where the fingers touch.
- Cut the deck into two halves of exactly 26 cards. To check, set them side by side and move cards across until they match.
- Tap each half on the table, or against the other half, until its edges are flush.
- Hold both halves face down, one in each hand, with their short ends facing each other.
- Put your left index finger under the left half and your right index finger on top of the right half. Bring the short ends together so they meet evenly.
- Move your left index finger to the far end of its half and push the halves gently together, so the cards slide in between each other.
- Keep pushing until the halves are one square deck again.
A fancier finish. Once the halves have woven an inch or so, you can bend the woven cards and let them spring together instead of pushing them square. Wikipedia calls this the bridge finish. It is the same arch as the bridge at the end of a riffle shuffle.
Common mistakes
A Reddit thread in r/cardistry, from a learner who could not get the halves to weave at all, drew about two dozen replies. These came up again and again.
- Halves that are not square. The most common answer. If the ends of either half are even a little ragged, the cards meet in clumps and nothing weaves. Square both halves again before every try.
- Halves that meet crooked. One reply said the two halves must meet evenly, not at a slant to each other. Others start deliberately at a corner (see the practice tips). Either way, each half has to be square.
- The wrong pressure. The replies split here. Two said the learner was not pressing hard enough. Others said that once the halves are square and the deck is the right way up, very little pressure is needed, and one said they pushed far too hard at first, as if joining two bricks. The advice that fits both: start light and add pressure a little at a time.
- Gripping too tightly. If your fingers clamp the halves, each card is locked in place and cannot move into the weave. Hold them firmly enough to keep them square, and no tighter.
- The wrong way up for the deck. If one way will not weave, turn both halves over and try the other way.
- An uneven cut. A perfect faro needs exactly 26 in each half. With one card too many on one side, the cards cannot alternate all the way through.
Practice tips
- Start at a corner. Several people in the thread said the weave starts more easily if you meet the halves at a slight angle so only the corners touch, get the first few cards to catch there, and let the rest follow, instead of pushing the whole ends flat in. Once the first cards catch, they said, the rest weave almost by themselves.
- Rub the corners. One person suggested rubbing the corners gently back and forth against each other with very little pressure, adding a little more only if nothing catches. It also teaches you how light the pressure should be.
- Do it without thinking. One person said it finally clicked when they tried it over and over while watching TV, and that they improved quickly after the first success.
- Give it time. One person in the thread said it took them over a week, so do not judge yourself by the first evening.
- If your hand gets tired or sore, take a break. This is hobby advice, not medical advice.
In-shuffles and out-shuffles
There are two ways a perfect faro can go, and magicians have names for them. Wikipedia credits the magician Alex Elmsley with both.
- Out-shuffle: the top and bottom cards stay where they were, on the outside.
- In-shuffle: the top card moves to second from the top, and the bottom card to second from the bottom. They go inside.
Which one you get depends on which half's card ends up on top. The surprising part: Wikipedia and the Playing Card Decks blog both say that eight perfect out-shuffles in a row put a 52-card deck back in exactly its starting order. With in-shuffles it takes 52, and after 26 the deck is in reverse order. Wikipedia also describes how magicians mix in-shuffles and out-shuffles to move the top card to any place in the deck they choose.
Where guides differ
Our sources agree on the outline: two exact halves, squared, pushed together at their short ends so the cards interleave one at a time. They are Wikipedia's articles on the faro shuffle and on shuffling, two articles on the Playing Card Decks blog (one a step-by-step, one on the shuffle's history and math), a card shop's glossary entry on how decks are cut, and the Reddit thread above for the mistakes. The steps above follow the blog's step-by-step, which is the only source that names the fingers. The blog ends with a pinch at the short ends that lets the cards fall into place; Wikipedia ends by pushing the halves together, or by bending them so they spring together.
They differ in three places. First, which hand holds from above: the two Wikipedia articles disagree with each other about which hand holds its half from above and which from below, so use whichever feels natural. Second, which way up: one Playing Card Decks article says most Bicycle decks are “modern cut” and faro best face down, while a traditional cut faros best face up; the other article and a commenter in the thread describe the same idea in ways that do not line up with that. All agree that the way the deck was cut decides which way it weaves, so the safe advice is to try both. Third, pressure: the thread is split between less and more. Our confidence in these steps: medium. Several sources agree on the outline, but only one gives finger positions, and we did not watch the video below.
Questions people ask
Why won't my faro shuffle weave?
The usual reasons, in order: the halves are not square, the deck is the wrong way up for how it was cut, you are pressing or gripping too hard, or the deck is cheap, thick plastic or badly worn. Square both halves, turn them over and try with lighter pressure before blaming yourself.
Is a faro shuffle the same as a riffle shuffle?
No. A riffle shuffle drops the cards off your thumbs and they fall roughly alternating. A faro is pushed together and, done perfectly, alternates exactly one card from each half. See our riffle shuffle page.
How many faro shuffles return a deck to its original order?
Eight perfect out-shuffles bring a 52-card deck back to where it started. With in-shuffles it takes 52, and 26 of them leave the deck in reverse order.
Why is it called a faro shuffle?
Wikipedia reports that it is named after Faro, an old card game in which the cards end up in two equal piles, and that the first clear written instructions are in John Nevil Maskelyne's 1894 book Sharps and Flats.
Does the faro shuffle mix the deck?
Not at random. A perfect faro moves every card to a place you can predict, which is why magicians use it. For a game with friends, use an ordinary riffle shuffle.
Watch it done
This is free. We have not watched it ourselves. We opened the page and confirmed its title and channel. The link goes to another site and opens there, and nothing from it loads on this page.
- How to shuffle cards like a pro (for beginners) // the perfect faro shuffle, from magician Jason Parker's channel
Keep going
- Riffle shuffle and bridge, the everyday shuffle and the arch that closes it
- Spring
- Where to buy cardistry decks
- The best cards for cardistry
- Cardistry for beginners: how to start
- All cardistry pages
- Glossary